---
title: "Container Load Calculator: 20ft & 40ft | SHIPMAX"
description: "Will it fit in a 20ft or 40ft? Fill a container with cartons or pallets in 3D, see payload and space used, then get a load plan to share."
url: https://www.shipmaxinternational.com/tools/container-calculator/
---

Tools

# Container Load Calculator. Fill the box, not the bill.

Pick a container, choose loose cartons or pallets, enter their size, and watch the load build in 3D. Unit count, weight against payload and volume used update as you go, with a warning the moment you go over a limit. Get the whole thing emailed as a load plan your forwarder can work straight from.

_Interactive 3D container load calculator: open this page in a browser to plan a load._

Small print. These figures are estimates to help you plan, worked out from what you enter and from published rates and rules that can change without notice. They aren't quotes, guarantees or professional advice. Container dimensions and payloads vary by shipping line, and road weight limits can cap a load below the container's rating, so confirm with your forwarder or carrier before booking. SHIPMAX accepts no liability for decisions made on the strength of these figures.

The working out

## Understanding container loading

The calculator above works out how many cartons or pallets fit in a sea freight container, how much of its payload they use, and how much of its space you are actually paying for. Get it right before you book and you avoid the two expensive surprises: a container that is over its weight limit, and a bigger (or second) container booked when a smarter load would have fitted.

### How the calculator works

It asks four quick questions, one screen at a time: which container, whether you are loading loose cartons or pallets, how big they are and what they weigh, and any height limit, layout or double stacking preference. The 3D view and the running total update with every answer.

It takes your carton or pallet footprint and lays it across the container floor, testing it both ways round (as entered and rotated 90 degrees). Best fit also mixes the two, turning some units to fill the strip a single orientation would leave empty, and keeps whichever layout fits the most units in a layer. Loose cartons are then stacked to the load height you set, up to the container's internal height. Pallets are loaded one tier high, or two if you choose double stacking and the height allows.

Units per container = best units per layer × number of layers

It then totals the cargo weight against the container's maximum payload and the cargo volume against its internal volume. Go over the payload and the calculator flags it straight away, so you see the problem on screen rather than at the port.

### Weight or space: which runs out first?

Every container load is limited by one of two things. Dense goods such as liquids, tiles or machinery hit the payload limit while the container is still half empty, which is why heavy cargo often ships in 20ft boxes. Light, bulky goods such as apparel, homeware or packaging fill the space long before they get near the weight limit, which is where a 40ft high cube earns its keep. Watch the payload and volume figures together: whichever reaches 100% first is the one setting your cost per unit.

### Standard container sizes

Swipe the table sideways to see every column.

| Container             | Internal size              | Volume  | Max payload | Best for                                                               |
| --------------------- | -------------------------- | ------- | ----------- | ---------------------------------------------------------------------- |
| 10ft Standard         | 284 × 235 × 239 cm         | 16.0 m³ | 8,860 kg    | Small or one off shipments, site storage                               |
| 10ft High Cube        | 284 × 235 × 269 cm         | 18.0 m³ | 8,760 kg    | Small shipments of light, bulky goods                                  |
| 20ft Standard         | 589.8 × 235.2 × 239.3 cm   | 33.2 m³ | 28,200 kg   | Dense, heavy goods that hit the weight limit before the space runs out |
| 40ft Standard         | 1,203.2 × 235.2 × 239.3 cm | 67.7 m³ | 26,730 kg   | The workhorse for general cargo and mixed stock                        |
| 40ft High Cube        | 1,203.2 × 235.2 × 269.8 cm | 76.4 m³ | 26,580 kg   | Light, bulky goods such as apparel, homeware and packaging             |
| 45ft High Cube        | 1,355.6 × 235.2 × 269.8 cm | 86.0 m³ | 25,680 kg   | Maximum volume, where the route and haulier allow it                   |
| 20ft Reefer           | 544.3 × 228.6 × 226.9 cm   | 28.2 m³ | 27,400 kg   | Chilled or frozen goods in smaller volumes                             |
| 40ft Reefer High Cube | 1,158 × 228.6 × 250 cm     | 66.2 m³ | 25,580 kg   | Chilled or frozen goods at volume                                      |
| 45ft Reefer High Cube | 1,310.4 × 228.6 × 250 cm   | 74.9 m³ | 24,680 kg   | Rare; confirm availability with your carrier                           |

Figures are typical published values and vary a little by shipping line. Have the exact spec for a booked unit? Pick Custom container and enter it.

FAQs

## Frequently asked questions

### What is the difference between a 20ft and a 40ft container?

A 20ft standard container measures roughly 5.9 × 2.35 × 2.39 metres inside, about 33 m³. A 40ft standard is twice the length at roughly 12 metres, about 68 m³. The catch is weight: a 40ft can carry around 26,700 kg of cargo, slightly less than a 20ft's 28,200 kg. So dense, heavy goods often hit the payload limit in a 20ft long before they fill a 40ft, while light, bulky goods suit the bigger box.

### What is a high cube container?

A high cube is about 30 cm taller than a standard container (roughly 2.7 metres internal height instead of 2.39) on the same footprint. A 40ft high cube gives you around 76 m³ instead of 68 m³. It is the go-to for light, bulky goods like apparel, homeware or packaging, and it can sometimes make room to double stack pallets that would not fit two high in a standard box.

### How many pallets fit in a 20ft or 40ft container?

On Best fit, which turns some pallets to fill the strip that one orientation leaves empty, the calculator fits 10 UK standard (120 × 100 cm) or 11 Euro (120 × 80 cm) pallets in a 20ft, and 22 UK standard or 25 Euro pallets in a 40ft, in a single tier. Laid all the same way round it is 8 of either in a 20ft and 20 in a 40ft. The best fit figures leave only a few centimetres to spare in a 40ft, so allow some loading clearance and confirm the final count with your forwarder.

### How much weight can a shipping container carry?

Each container has a maximum payload, the cargo weight it is rated for on top of its own tare weight. Typical figures are around 28,200 kg for a 20ft and 26,700 kg for a 40ft standard. In practice, road weight limits in the country of collection or delivery often cap the load well below that, so check with your haulier before you plan to the container's full rating.

### Should I ship floor loaded (loose) or palletised?

Floor loading cartons straight into the container uses the space better, often fitting noticeably more stock, and avoids the cost of pallets. The trade off is unloading: loose cartons are handled one by one, and many 3PLs charge a devanning fee per container for floor loaded freight. Palletised loads unload in minutes and go straight into racking. Run both modes in the calculator to see the difference for your cartons, then weigh it against your warehouse's handling charges.

### What is a reefer container?

A reefer is a refrigerated container for chilled or frozen goods such as food, beverages and some cosmetics. The insulation and refrigeration unit take up space and add weight, so a 20ft reefer is smaller inside (about 28 m³) and heavier empty than a 20ft dry container. Plan reefer loads with the reefer presets rather than the dry ones, and leave room for air to circulate around the cargo.

### Can I double stack pallets in a container?

Only if the height allows and the goods can take it. Two loaded pallets have to fit under the container's internal height, and the bottom load has to bear the full weight of the one on top, which is usually the real limit rather than the container itself. Sturdy, uniform cartons stack well; fragile goods, liquids and irregular loads generally should not be double stacked. Tick double stack in the calculator and it will tell you whether two tiers fit.

## Container on its way. Need somewhere to unload it?

We match consumer brands with vetted 3PL and fulfilment partners across the UK, EU and US, up to three matches, 0% commission to brands. Send us your inbound plan and we'll tell you who can handle it.

[I'm a brand, find me a 3PL](https://www.shipmaxinternational.com/for-brands/) [See all tools](https://www.shipmaxinternational.com/tools/)
